1 / 2
Doppelzahnrad 115-127 für Bernardo P600G, Double gear 115-127 for Bernardo P600G — zdjęcie 1
1 / 2

Doppelzahnrad 115-127 für Bernardo P600G, Double gear 115-127 for Bernardo P600G

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Doppelzahnrad für zöllige Steigungen 11.5, 23 & 46 GG. Double gear for imperial threads with 11.5, 23 & 46 tpi and NPT

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
74
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Doppel-Zahnrad / Wechselzahnrad mit 115-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. 
Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die Steigungen 11.5, 23 und 46 Gänge pro Zoll möglich. 
Hebelstellungen siehe Tabelle. 
11,5 GG/" haben z.B. die amerikanischen Rohrgewinde NPT National Pipe Taper,

Müßte auch an baugleiche Modelle wie HBM 280x600, Paulimot PM 3700 oder Warco GH 600 passen.

Gedruckt mit Prusa MK4
PLA
3 bis 4 Perimeter
50 % infill
Position der Naht: zufällig

Achtung: Für einen paßgenauen Sitz muß die 14mm Bohrung mit einer 14 H7 Reibahle auf genaues Maß gebracht werden!!

Falls es jemand druckt und verwendet, bitte um Rückmeldung ob es auch wirklich an den anderen genannten Drehmaschinen paßt.
………………………………………………..
Double gear / change gear with 115-127 teeth for driving the feed gear on the Bernardo P600G lathe for cutting inch thread pitches. With this double gear instead of the original 120-127, pitches of 11.5, 23 and 46 threads per inch are possible. See table for lever positions. The American pipe thread NPT National Pipe Taper, for example, has 11.5 GG/".

Should also fit on identical models such as HBM 280x600, Paulimot PM 3700 or Warco GH 600.

Printed with Prusa MK4
PLA
3 to 4 perimeters
50% infill
Position of the seam: random

Please note: For a perfect fit, the 14mm hole must be brought to the exact size with a 14 H7 reamer!!

If anyone prints it and uses it, please let me know if it really fits on the other lathes mentioned.

Tagi