1 / 6
Enclosure Hinged Lid Modification - Remix of Petr Zikmund's "Complete modified Hinged lid for Original Prusa Enclosure" — zdjęcie 1
1 / 6

Enclosure Hinged Lid Modification - Remix of Petr Zikmund's "Complete modified Hinged lid for Original Prusa Enclosure"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A couple slight modifications to Petr's design, I really liked what he created, just wanted to tweak it a little

Ocena
5 / 5
Polubienia
16
Pobrania
91
Wydruki
1
Wyświetlenia
846
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is a remix of Petr Zikmund's "Complete modified Hinged lid for Original Prusa Enclosure". I really liked what he had created and I printed his design for my enclosure, after using it for a short time, I broke one of the latches. When I was replacing it I stripped the plastic out of the holes when running the bolts in too tightly. So I decided to make a couple mods for myself. My version does require some separate hardware that some people may not have on hand. For the corners I changed from the supplied M4x5r bolts to some M4x8rT I had, and I bought some M3x5 bolts to replace the M3x4 that come with the enclosure for holding the top on originally, I also had to buy some M3n hex nuts because I did not have enough spares from the enclosure kit. To unlock the latches on mine, I have been opening the front doors and pressing them out from the inside, they can be unlocked from the outside, but its a little difficult. I also think that if someone has the lock for the enclosure that they could remix the latches so that they would be much more difficult to unlock from the outside.

Tagi