1 / 4
WLtoys P929 30x13,5mm wheels and tires — zdjęcie 1
1 / 4

WLtoys P929 30x13,5mm wheels and tires

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These will fit the WL Toys P929 and any other similar 1/28th scale car from WLtoys.

Ocena
0 / 5
Polubienia
9
Pobrania
34
Wydruki
0
Wyświetlenia
449
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

These will fit the WL Toys P929 and any other similar 1/28th scale car from WLtoys. 

 

I made them to fit a more scale body to my car, with narrower wheel arches. I printed the wheel in PLA and I am testing variants of the tire with TPU and FlexPLA, which is what I have lying around. 
 

*edit: 

I added a second type of tire, one which with a single perimiter is a little softer, and has a lower chance of rubbing against any third party bodies. The first wheel works fine with my p929 body. 


Print settings:
Wheels:

  • 0.15mm layer height, generic PLA profile from PrusaSlicer
  • Support on bed

Tires:

  • 1 perimiter
  • 0.2mm layer height, Generic PLA (for flexPLA) or Generic TPU (for TPU), change as you see fit
  • I'm testing out the “fuzzy skin” at 0.3mm and 0.3mm to see if I get any more traction that way

Tagi