1 / 5
Tuya temperature sensor cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outside temperature sensor cover
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (23)Powiązane
Fully printable cover for tuya temperature sensor. The only thing You need is some superglue and screws to attach.
Update 12.12.2024:
- Rearanged files into appropriate folders.
- Added 39mm/13mm version.
- Specified original sensor size.
Printing should require supports only in one place (marked green):

(enforce supports for 35deg overhangs and remove those marked red)
After printing use superglue (or soldering iron) to attach holder to base.
Files are prepared for 5mm screws flat or 5mm screws on 380mm pillar.
Step files are also included. Not only to make remixes, but to change parameters of holes and pillar:

Happy 3d printing :)