Monitor pole mount for Creative Air Stage V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount that lets you mount the incredible value for money Creative Air Stage V2 on your Multibrackets monitor mount
- Ocena
- 3 / 5
- Polubienia
- 14
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 1230
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
You should go use the updated version here, instead!
This version is outdated and inefficient!
I wanted to get the my Creative Air Stage V2 soundbar off my desk, so I made this mount for my monitor mount. If you have a monitor with a USB-hub, that works perfectly with this mount.
This is designed to fit on a Multibrackets monitor mount, which has a pole diameter of 35 mm. Any other brand that has the same diameter will work, but let me know if you need a different inner diameter and I can make an adapted version or simply an adapter ring. PLA holds up fine, the soundbar is not that heavy.
You will need:
- 2x M5x20 screws to install the clamps to the pole mount. You can get away with M5x16 up to M5x25 probably
- 2x M5x16 screws to tighten the pole mount to the pole
- Four M5 nuts to mate with the screws
- Some PLA
To install:
- Attach the clamps to the pole mount
- Attach the pole mount by sliding it in from the top (do not bend it open to attach it; it will break. Sorry, you'll have to take the monitor mount off the pole, or unscrew the bottom mount from the pole)
- Push the sidebar in from the front, he clamp should open to accept it.
- The rubber feet on the soundbar sit right outside the clamps width and do not interfere, so you can keep them if you want to use it
- The input jacks on the back are not blocked by the mount