1 / 4
A compact box for a set of step drills (configurable) — zdjęcie 1
1 / 4

A compact box for a set of step drills (configurable)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a box to hold the sets of three step drills as sold by Lidl (Parkside) and Aldi (Workzone and maybe Ferrex TBC).

Ocena
4,5 / 5
Polubienia
20
Pobrania
198
Wydruki
3
Wyświetlenia
749
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This is a box that will hold a set of three step drills, with variants to suit the set as sold occasionally by Lidl (under the ‘Parkside’ brand) and the set from Aldi* (under the ‘Workzone’ brand), and it can be configured for other step drill sizes.

Both the base and the lid are shaped around the step drills to ensure that they are held securely in place.

The design uses a snap-on lid with a lip at the back and a clip at the front, and the base incorporates a slot that provides the necessary flex for the front clip to work easily.  To close the box, hook the lid onto the lip along the back edge then snap it shut over the front catch.  To open the box, squeeze the base at the grip marks below the catch.

The Parkside and Workzone drills aren't quite the same, so two sets of STLs are provided in corresponding folders.

Within both folders the STLs include:

  • A base.
  • A lid, with the words ‘STEP DRILLS’.  You can either print the lid with the lettering left empty, and allow the slicer to bridge over the letters above 0.6mm, or you can use the supplied lettering file to print the lettering in a different colour.
  • A plain lid, in case you don't want any lettering, or you want to change the wording without using the OpenSCAD script (e.g. using a text modifier in PrusaSlicer).
  • A lid with the corresponding logo (‘Workzone’ or ‘Parkside’) and the words ‘STEP DRILLS’ included.  The corresponding logo files are supplied as separate STLs to allow them to be coloured separately.

I've included the OpenSCAD script that I used to make the box.  It includes a general purpose module to model a step drill from a few specific measurements, and options to include some lettering on top of the lid (e.g. ‘STEP DRILLS’) and an image from a supplied SVG.  I've included SVGs for the Workzone and Parkside logos.  The overall dimensions of the box can be modified, should you wish to adapt the box to suit a different set of step drills.

I've printed my samples in PETG, with a 0.4mm nozzle, 3 perimeters and 7% Gyroid infill, making for a rigid box with enough flex in the slot for the catch to work effectively.  I haven't tried the design with other materials - PLA may make the catch stiffer.

To colour the Parkside logo, it can be ‘Split into objects’ in PrusaSlicer, so that every letter and every stripe becomes a separate item.  The stripes can then be configured to have a different colour from the letters.

To colour the Workzone logo, since some of the letters are joined to the others, it is better to use a cubic ‘modifier’ that covers the ZONE part of the logo, and assign a different colour to the modifier.

* Aldi appear to have dropped the Workzone version of their step drills, and now offer a set branded as ‘Ferrex’.  I haven't tested this design with the Ferrex drills, but they look as though they might be the same as the current Parkside drills.  If they're not, the included OpenSCAD script can be modified to suit by taking a few measurements from the drills.

Update 7th July 2024: I've now added a Ferrex logo (STL and SVG) and a lid with the Ferrex logo.  This is untested, as I don't have a set of the Ferrex step drills.  From online photos it does look as though the Ferrex set is the same as the current Parkside set, so my Ferrex lid is the same as the Parkside lid apart from the logo.  If the drills are indeed the same, you can use the Parkside base with the Ferrex lid.