Sovol SV08 closed top extention lit with filtration (HEPA+Carbon) up:27.07.24
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sovol SV08 closed top extention lit with filtration (HEPA+Carbon)
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 437
- Wydruki
- 7
- Wyświetlenia
- 3081
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Sovol SV08 closed top extention lit with filtration. You can use Roborock S7 Hepa filter and carbon filter at the same time.
Upgrades:
- Fully closed
- Stackable
- Filtration
- Cut-outs for the fan and the filament sensor cables
- Every parts located to the right side of the printer
- Filament is also at the right side, you can use filament dryer
BOM:
M3x4x4.5 heat set inserts for the filter and if you want to stack more level.
M3 screws in various size.
2x6015/6020/6025 24V fans + wires to connect to mainboard.
About 1kg filament. I used PETG.
Updates:
08.12.2024. Added rsdoc model (DesignSpark Mechanical). You can convert is to STEP, using DSM 7 days trial version!
27.07.2024. New pictures
19.07.2024. New filter parts for Roborock S7 hepa filter with dual 6025 fans.
04.07.2024. Make the filament holder holes bigger + modified filter grill vertical fixing hole
03.07.2024. New pictures
28.06.2024. Make the filament sensor holder lighter.
27.06.2024. Top screw holes fix to print without support. 0.3mm thin layer.