1 / 2
TYT MD-UV390 MD-390 Speaker Mic Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU Cover for the Kenwood style speaker mic port.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 178
- Wydruki
- 0
- Wyświetlenia
- 749
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This is a cover for the Kenwood connector port on the TYT MD UV390. It was designed to be used with a Commountain speaker mic.
Version K Prints Face Up with Supports for the Screw. I increased the support roof distance to 0.3mm to help with support removal. I made the whole model a bit thicker as well. I also enabled Ironing to help smooth out the face.
