1 / 13
4.7 Liter ITX ASUS 4060 LP, Asrock B650i Case 500W HDPLEX — zdjęcie 1
1 / 13

4.7 Liter ITX ASUS 4060 LP, Asrock B650i Case 500W HDPLEX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

7,60 € – 9,28 € netto (bez VAT)

Dla pliku: Lirael 1.3 Top Pos2.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 8,44 € netto (środek widełek).

Masa podana przez autora
195 g
Czas druku podany przez autora
4,78 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Part Specific Built, The gigabyte LP card is longer and 100% wont work HDPLEX 500W Asrock B650i Lightning Asus 4060 LP

Ocena
0 / 5
Polubienia
13
Pobrania
92
Wydruki
0
Wyświetlenia
1444
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
this is part specific, guaranteed fitment with…

asrock b650i lightning, with IO plate removed
asus 4060 lp with io shield removed
and up to about 69-71mm cpu cooler clearance, I have used a IS-55 with a P12x25mm
you want a 120mm fan for the lid part, and would highly reco. using the biggest heatsink you can and also being as close to the lid as possible
and hdplex 500W GaN PSU

assembly.

Use of other motherboards, GPU's, PSU. May not work. This is your warning.

mobo.
4 m3 heatset short
4 m3 screws

lid
12 heatset short
12 m3 screws

psu.
no mounting, its like. press fit, use your cables, I originally did have mounting holes but due to this detail and warping issue i didn't see it being required anyway.

Psu's power plug - 2 m3 screws (long) 2 nut

Power button - included hardware.


sub5l traditional layout case, with no external power brick. all IO is on rear, including power button





Update NFO



Lirael V 1.2 Changes

- Additional CPU exhaust
- Small Cutout on GPU heat shield to facilitate easier mobo installation, may effect perf.
- Additional exhaust on "bottom" of case exclusively for “stand” mode

***



Lirael V 1.3 Changes

- Specific for Asrock B650i Lightning (3dp IO Shield integration thanks to v1.2 cutout)
- Less Overhangs (Turned PSU Airvents and GPU Airvents Verticle)
- Larger reinforcement nibs on IO

*****



Top 1.2 changes

- reversed heatpipe orientation 

***



Top 1.3 Changes 

Y- (POS 1)
- For heatpipes like in pic an IS-55
- recessed/chamfed screw holes
- GPU vent more verticle to assist in recycle prevention.

***

 X- (POS 2)
- Optimized for IS-67-XT with silverstone air slimmer, orientation for cooler is heatpipes of cooler towards GPU
- Vents are moved over, GPU vent more verticle to assist in recycle prevention.
- recessed/chamfed screw holes

******
1.5 Final
- Supportless (Built In Supports!)
- More flow (Hexagons!)
- Universal UP (Large IO)

******

1.5F
-Test panel added
^^^^^^^^^^^^^^^^^^^^

All versions interchangeable*
* top/bottom



Actual Part List (With Links)

12mm power button 
500W HDPLEX GaN PSU
Mobo
RAM
CPU
gpu
m.2   x2
shorty inserts
m3 screws
nut
Cooler (1.2 and down)
Fan      (1.2 and down)
Top 1.3 Cooler
Top 1.3 Fan




1.3 version untested thermals atm. Most likely better.




1.5 F (SFFPC DISCO EDI. All Polygons, some tiny features (elongatedcable shelf above psu, cable shelf added along mobo) more like cable keeper downer). Poly angles everywhere, more holes, more airflow. poly angled gpu may have better print quality. 

Tagi