Iron MSE Greebles (P3 RGB Matrix Frame)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A frame to protect the RGB Matrix panels on the side of my MSE-666 droid
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As mentioned in my RGB Matrix Jig printable, I obtained a pair of 64 x 32 LED matrix panels.
These are mounted where they might be bumped, kicked or otherwise impacted. I have Adafruit's diffusion acrylic which both protects the LED faces and diffuses their raw output. I needed a way to attach this to the panels. I didn't want to use transparent double-sided tape out of concern that it might rip the LEDs off the panel if it is too strong, and might simply fall off if it isn't strong enough or gets too hot.
My frame simply press fits over the panel and the acrylic sheet.
Because of my application, the short sides of the frame include attachment recesses for the optional “Heatsink” detail parts. These are purely cosmetic. If you want these details, print two copies, one for each end of the frame. I simply hot glued them on after painting.