Greasing tools kit for Favero Assioma Pro MX power meter pedals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Favero includes them in the box, but just in case you didn't realize those were important, here are replacements.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 1122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you've got a set of Favero Assioma Pro MX pedals, you should be keeping up on regreasing the roller bearings in the pedal body. Favero includes the necessary tools to keep grease off the threads during regreasing in the box that came with the pedals, but in case you were a bit careless and lost them, here's a printable replacement.
Shown in the first photo next to the Favero original tools.
See Favero's how-to video to see how these should be used.
Prints well at 0.2mm layer height (0.4mm nozzle) with default settings, no supports needed, although you might need to use a brim on the tall and thin “B” part depending on your bed adhesion performance. Also check the fit on the “B” part as it's a press fit into the threads, depending on the calibration of your printer you may need to scale it. The “A” piece has an M17x1 thread and if you find the need to scale that, only scale it in the X and Y dimensions so you don't change the thread pitch.