1 / 12
Tiny Owl
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny, articulated, and print-in-place cute Owl!
- Ocena
- 5 / 5
- Polubienia
- 485
- Pobrania
- 2268
- Wydruki
- 26
- Wyświetlenia
- 6677
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 26) (Komentarze: 30)Remiksy (0)Kolekcje (488)Powiązane
Print-in-place articulated Tiny Owl!
My smallest design up today 😁
Keychain version included!
Considerations:
- It's small and articulated. That means that good bed adhesion is required. For tricky filaments that usually have worse adhesion I recommend using some kind of glue (my personal favourite is 3DLac spray).
- Because of its size, I recommend printing them at 0.16 mm layer height. 0.2 mm should work as well.
- It has a small built-in brim for the wings. Easy to remove after printing.
- It has a couple of support dots in the armpits to help stabilize the wings during printing. It may feel a bit hard to open the wings on the first try, but should be loose after that.
- To change colors easily, check my quick tutorial.
EDIT: After several requests, I've added a version with a larger gap for the head articulation. You can find them with the suffix “XG” inside the extra gap folder.