1 / 3
Vernier caliper's jaw adapter for disc brake rotor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Measure disc brake rotor wear/thickness with these jaws adapter for Mitutoyo 530-122.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
I made these adapters to use my Mitutoyo 530-122 vernier caliper to measure wear on my car disc brake rotors and avoid the outer lip left when the rotor sees a lot of wear.
The offset should be 20 mm, if your printer is not accurate enough you can use a file or nail file to adjust the contact point of the pins.
The model is parametric but I think not enough to be universal.