Vertical Axis Wind Turbine - LEGO Compatible (Savonius)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a drag type wind mill. The height is 120mm, diameter is 120mm. It can be fitted onto a lego axle and is stackable.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 894
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
You should print one section at a time and lower the speed as the height increases in order to get a nice print. The best option for mounting this turbine is to secure the axle it will be placed on both from the top and the bottom. The design is stackable so you can print is as tall as you want resulting in greater power output. Moreover i highly advise you to gear down the output of the turbine to raise the torque created. I am really curious what designs you may use it in so if you happen to print this model please share photo of your creation as a make. Happy windmilling!