K40 2nd mirror mount v1.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed 2nd mirror mount for k40 laser.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 220
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
I had to design the 2nd mirror mount for the k40 laser myself(I didn't like the other options. The original mount was not stable and the screws came loose. This version I design is not finished yet, but it perfectly usable.
Any other future version will be removing as much unnecessary material and cosmetics.
you cannot use the original screws with this. you will need 2 M3x12 and 3 M3x16.
- Update
Version 1.3 can slide in the Y axis and it has a guide rail for the whole mirror.
There is more room for the fingers to adjust the screws for the mirror.
It is 10% more compact and it uses way less filament. I printed the mount at .2 mm, but I believe a smaller resolution would be best for the rails.
This so far is the latest version unless something change.
Working on a mount for the gantry…