1989 Beads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beads designed for resin printing to make friendship bracelets. To be used with 0,5mm cord, with a beading needle.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 167
- Wydruki
- 3
- Wyświetlenia
- 807
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
I created this model of 1989 (Taylor's version) beads to make friendship bracelets with. Please note I made them as small as possible because I found that created the most beautiful bracelets. Filament printing did not make these as perfect as I wanted to, so I opted for resin printing.
The hole the cord is threaded through was also kept small to prevent the beads from wiggling around and misaligning too much. I used 0,5mm crystal elastic cord to create bracelets with these beads, and used a beading needle to thread the cord through. A beading needle (I used one from Rayher) is ideal for creating jewelry with these beads.