Hexpansion Storage for EMF Camp Tildagon Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage solution for Tildagon Badge Hexpansions
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 3
- Wyświetlenia
- 244
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Storage for 6/12/18 Hexpansions and for Gridfinity fans a 1x1x2 with 6 slots and a 2x1x2 with 14 slots. If you want a different amount of slots let me know and I can add some models.
Each slot should perfectly hold 1.0mm PCBs without them falling out.
If you have any 3D printed Hexpansions then you should try and ensure that the bottom 8mm of the Hexpansion is as close to 1.0mm as you can get, I had to sand a few of mine down slightly. Hexpansions thicker than 1.0mm might wear out the slots to a point where PCBs have a loose fit and may fall out. Ensuring the correct thickness will also help prevent premature wear of the badge Hexpansion connector.
Due to the differing widths of Hexpansions I decided against creating multiple columns in one print. If you want one with multiple columns you can either reach out to me and I can create one or you could combine in your slicer.