Custom longboi Cynthia Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All the custom/modified parts I made for my Cynthia bolt action nerf blaster build
- Ocena
- 5 / 5
- Polubienia
- 113
- Pobrania
- 548
- Wydruki
- 13
- Wyświetlenia
- 2944
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an upload of all the files I used in making my Cynthia, based on/Inspired by the looks of the Indra Full Snooper Variant and incorporating from scratch redraws of some other existing mods, such as a fully enclosed bolt guide, dart guide and deeper buttstock.
Some notes:
Needs no additional hardware outside of what the parts kit came with.
All the files are oriented as they should be printed.
Most of the tolerances are set at 0.1mm which might be too tight for some printers, Ymmv.
You will need a large format printer to print some of the parts without cutting them up first.
The hand guard is a single piece a little under 39cm tall.
The split hand guard needs glueing together at the joints, CA glue should be strong enough but a 2 part epoxy might be better due to the longer working time/less brittle bond when cured.
The bent bolt handle is keyed and glues into it's hole in the bolt base, printed solid on it's side it's been nice and strong so far, some sanding will be required to smooth and round out the underside (as printed) of the shaft and knob (I also used CA glue as a filer).
There is also a BoltBase for stock straight bolts.
The order of assembly differs only a little from normal, mostly with regards to the trigger as it needs to be dropped in to the bolt guide and the rod then threaded in from the back, please consult the CAD file to see what goes where.
Hardware List=
Out Of Darts parts kit
Spring of choice (K26 in my case)
45cm, 13mm ID, 16mm OD Barrel
(EDITS)
Added a split handguard + refined barrel O-ring grooves
Added BoltBase for stock straight Bolt Handle
credits
The blaster, Cynthia - Bolt Action Blaster
The Rails, Parametric NATO (Picatinny) rail
Inspiration/Basis for the handguard, Indra Full Snooper Variant
Inspiration/Basis for the fully enclosed Bolt guide, Cynthia Closed Bolt mod/Custom Sillybutts Cynthia
Inspiration/Basis for the dart guide, Improved Cynthia Dart Guides
Inspiration/Basis for the buttstock, Cynthiøx Stock - Skeggøx buttplate meets Cynthia