1 / 7
#0172 Collapsible Hammock Tray [print in place] — zdjęcie 1
1 / 7

#0172 Collapsible Hammock Tray [print in place]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A unique collapsible tray for multiple uses. Bringing an old craft forward with 3D printing.

Ocena
5 / 5
Polubienia
52
Pobrania
124
Wydruki
2
Wyświetlenia
754
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!  

**********

I've been thinking about modernizing this art form with 3D printing - so a contest about Collapsible Models is just the motivation to work on it!

This Collapsible Hammock Tray can be useful in a few different areas:

  1. Catch all tray for your change and small items.
  2. Eye glass holder.
  3. Swivel/tilted display for your jewelry.
  4. A unique tip jar.

Key Features:

  1. A nesting SPIRAL that telescopes out to become a tray.
  2. It can lock itself in tray form using friction.
  3. Print-in-place (PIP) stand and cross foot - no assembly required.
  4. Option to print without a stand.

Three Variants Provided:

  1. With a stand, cross foot, and hold down clips.
  2. With a stand, cross foot, but no hold down clips (good with PLA too).
  3. By itself - holds itself in shape with friction (good with PLA too).

Printing Recommendations:

  1. Print as oriented on the bed as shown in .stl file. 
  2. Make sure your printer is calibrated with the correct extrusion multiplier.  If it over-extrudes, you may end up welding the hinge (pivots) together.
  3. Even with correct extrusion multiplier, BE CAREFUL to slowly break the hinge joints free by moving it back and forth until they start rotating.
  4. PETG/ABS/ASA recommended. Tested with Polymaker PETG.
  5. 0.2mm layer height, 0.4mm nozzle.
  6. PLA has a lot of color options that are enticing but beware that it tends to be brittle and the clips might break on you.  If you print with PLA, I suggest the variant where the hammock tray is by itself, or the variant without clips.
  7. You can scale it up for a larger size, but don't scale it down.

**********

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.

Tagi