BL Touch and EBB36 mount for Microswiss NG (Ender 5+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BL Touch and EBB36 mount for Microswiss NG (Ender 5+)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I found the mount provided by MS to be fairly flimsy, so I designed my own. It uses M3 (x4mm high and 4.5mm in diameter) inserts for attaching the BL Touch, and M3x6mm bolts.
For attaching to the motor, I removed the two lower motor bolts, and used slightly longer (M3 x 25mm) ones to attach the mount. I don't have the length of those handy, but can get that if needed. The ones used by the motor manufacturer were the absolute cheapest possible bolts, and the heads strip out VERY easy when removing. Consider yourself warned.
The EBB36 is intended to be attached with standard brass standoffs. Haven't gotten that far yet.