Papilio Lite extruder HGX r3.1 with shoulder screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use shoulder screws.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 1048
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The goal is to solve the overtightening situation.
The original assembly method is to manually feel the tightness by moving gears; it works fine, but I want to try other methods. The idea is to use shoulder screws to limit how deep the screw can go.
Here is the change I made:
use shoulder screws.
use M2.5 heat inserts to match shoulder screws.
more space for drive pulleys, about 0.5 mm.
more space for primary gear, about 0.5 mm.
Hardware requirments:
(Please check the pictures for actual dimensions.)
shoulder screws: M2.5*4 x4
shoulder screws: M2.5*18 x4
heat inserts: M2.5*5*4.5 x8
Build instructions:
Mostly follow the original intructions but different is heat inserts install direction, all 8 heat inserts install from bottom of upper base, and it is critical the heat inserts must aligned with bottom surface.