Heltec Wireless Paper case for Meshtastic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom enclosure for Heltec Wireless Paper with scalable battery space, simple side button design, and no supports neede
- Ocena
- 4,75 / 5
- Polubienia
- 90
- Pobrania
- 719
- Wydruki
- 8
- Wyświetlenia
- 3982
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Let me introduce you to my custom-designed enclosure for the Heltec Wireless Paper. This enclosure is versatile, accommodating larger batteries, and features a simple button design on its side for easy operation.
Hardware:
- Heltec Wireless Paper board
- SMA pigtail (included with the board)
- 2x M2 screws (included with the board)
- 4x M3x12-14mm button head screws
- 4x M3 heat inserts
Print Settings:
- Layer height: 0.2 mm
- Perimeters: 3
- Bridge infill direction (Bridging angle in Prusa slicer): 90° (to avoid long bridging on the logo)
- Supports: Not needed (holes have a thin layer so the bridges print nicely)
Battery Compatibility:
The back case is designed to fit batteries up to 41mm x 76mm, with three thickness options:
- S: Fits flat batteries up to 7mm.
- M: Fits flat batteries up to 12mm (e.g., 4000mAh 124065, the largest found so far).
- L: Can fit two 18650 batteries in a holder (e.g., https://aliexpress.com/item/4001152338150.html) or other batteries up to 19mm.
Additional Information:
My design is somewhat parametric (still learning), so I can adjust it to different sizes based on demand.
Note: Be gentle when tightening the screws :)