Phone Holders for Bogg Bags
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone holders designed for Bogg Bags, Buttons spaced to bridge 2 holes on the Bogg Bag oriented vertically. Can be…
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 478
- Wydruki
- 2
- Wyświetlenia
- 1783
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Phone holders designed for Bogg Bags, Buttons spaced to bridge 2 holes on the Bogg Bag oriented vertically. Can be mounted on inside or outside of Bogg Bag. Larger case is based on an iPhone 14 Pro Max in a case. Smaller modeled to hold iPhone 14 or IPhone 14 Pro in a case. Will fit other phones and can be remixed to get a good fit for any phone. Tolerances are tight to get a good secure hold on the Bogg Bag. Notch on bottom makes it easier to keep clean and allows you to push the phone up and out of holder. Top notch enables easier access to grab the phone from the holder.
Print Settings
Printer Brand:
Formlabs
Printer:
Formlabs Form 3L
Yes
Supports:
Yes
100 micron
Infill:
NA
Notes:
I printed with using Formlabs Clear Resin and it is clear enough to read the screen through the holder. My wife mounted hers on the outside of her Bogg Bag so she can see notifications and decide whether she needs to act on them or not without removing the phone from the holder.
Post-Printing
Standard Post Printing
How I Designed This
Designed using Shapr3D on an iPad Pro
Buttons for bridging two holes on the Bogg Bags are spaced 82 mm apart (center to center)
Botton is 15 mm in diameter and 3 mm thick, offset from holder outer wall by 8 mm on an 8 mm diameter post. You can use this info to make a holder customized to your own phone.
Category: Mobile Phone