Sanjay Mortimer E3D Founder Commemorative Snow Flake V6 Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This season and always, you can remember E3D Founder Sanjay Mortimer with this V6 edition commemorative Snow Flake.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 56
- Wydruki
- 2
- Wyświetlenia
- 722
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Public Domain
Based on Pooch's original Sanjay Mortimer E3D Founder Commemorative Hex Tile, and with a little help from Fixumdude, I wanted to memorialize Sanjay and his legendary V6 hotend with a unique snow flake.
While never near the holidays, it seems that every time I had the opportunity to hang with Sanjay face-to-face, there was either snow on the ground or is was at least cold as hell.
2 versions included. The mini version will print fine in resin and may print OK FDM with a VERY small nozzle. The larger prints good on the Prusa Mini with a 0.4 nozzle as long as detect thin walls is enabled. Obviously, it would also do better with a smaller nozzle…