Royal Ontario Museum Street Map
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D Model of the area surrounding the ROM in Toronto, Canada. From St. George to Queens Park.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
A 3D Model of the area surrounding the ROM in Toronto, Canada.
this is sourced from the Toronto 3D Massing Archive set, and painstakingly cleaned up for 3D Printing.
Four Edges are:
Bloor Street (North)
Queens Park (East)
Hoskin Avenue (South)
St George Street (West)
this includes roads, trails, buildings (low poly), buildings (high poly, depending on recency), and is easy to colour change for multi-colour printing.
For colour changes, i recommend slicing at 0.30mm layer heights, and doing the changes at:
Colour 1 (Base): Layer 1 to Layer 11 (3.30mm)
Colour 2 (Roads and Trails): Layer 12 (3.60mm)
Colour 3 (Buildings): Layer 13 onwards (3.90mm onwards)
On some printers you may have to adjust the colour changes accordingly but thats what I found works for me :)