1 / 3
Dana Dolly Tie Down Knob for O'Connor 1030 fluid head
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a knob to tie down the O'Connor 1030 fluid head to a Dana Dolly. You only to buy an M10 x 1.5 nut.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
The tie-down on my O'Connor 1030 does not reach the bottom thread when used with the Dana Dolly. This is an alternative tie-down. There's no need to use the bottom dana dolly washer. You just need an M10 x 1.5 nut.
I used 15% detail and 70% infill to print (PETG).