Sovol SV08 Orca Profile - Gohan (w/ filament)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have exported the entire SV08 Orca profile and with my PETG profile. If you do download the PETG profile, please tune.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 1019
- Wydruki
- 0
- Wyświetlenia
- 4240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
**************************************Update: 7/26/24******************************************
For the most recent changes and notices about my macro setups, see my github.
New updates to my profile. Now filament is added to the start gcode
M104 S0 ; Stops OrcaSlicer from sending temp waits separately
M140 S0
START_PRINT EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature] CHAMBER=[chamber_temperature] MATERIAL=[filament_type]
Profile changes uploaded.
**************************************Update: 7/26/24******************************************
-I have changed the entire orca machine start gcode now:
M104 S0 ; Stops OrcaSlicer from sending temp waits separately
M140 S0
START_PRINT EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature] CHAMBER=[chamber_temperature]
The Printer start print macro can be found here: https://github.com/ss1gohan13/A-better-print_start-macro-SV08
Along with all of these changes, I have also installed KAMP: https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging
The reasoning for this is to allow the printer to abandon the custom purge line sovol setup and use the adaptive purge line, and smart parking to prevent excessive blobbing on the nozzle before printing.
**************************************************************************************************
This profile has been modified from the SV08 profile. I'm not sure what all will be included with my upload, but the SV08 profile I am running should be labeled as ‘-Gohan’.