James Webb Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
James Webb Clock designed for the BambuLab Clock Components Kit 011
- Ocena
- 5 / 5
- Polubienia
- 135
- Pobrania
- 216
- Wydruki
- 1
- Wyświetlenia
- 1485
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
My new A1 Mini came with a Clock Kit so I decided to try to make something for it. I wanted to try making a mirror finish on a printed part, and came up with the idea of making a James Webb clock! This print doesn't require an AMS.
To get the mirror finish, a Wham Bam PEX plate was used, but the plate was left untouched and not scuffed. Silk Gold PLA from ESUN was used for the mirrors, and to get a good bottom surface, the bottom layer flow ratio was increased. The print was paused at layer 20, and then the filament was changed.
Printer:
- A1 mini
- 0.4 mm stainless steel nozzle
- Wham Bam PEX for A1 mini
- Mirrors: Esun PLA Silk Gold
- Body: Esun PLA+ Black
Settings:
Slicer: Orca Slicer 2.1.1
Quality:
- Bottom surface flow ratio: 1.75
- Only one wall on first layer: Yes
- Avoid crossing walls: Yes
Support:
- Enable Support: Yes
- Don't Support Bridges: Yes