1 / 2
Upgrade kit for hungate tube roller for agar medium — zdjęcie 1
1 / 2

Upgrade kit for hungate tube roller for agar medium

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrade / repair kit for hungate tube roller that is used to prepare growth tubes with agar medium layer on the walls.

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

In our lab we used the Hungate tube rotator from "Kontes Glass Co." to prepare Hungate tubes with agar medium on the walls (surface attached cultivation of microorganisms). 

Plastic parts of back and front support was worn off, so designed the new ones since  we couldn't found any replacement parts. Support parts were printed of Polycarbonate , but some softer plastic with more friction would be a better choice (perhaps, TPU) or extra layer of sprayed polyurethane might be sufficient.

Also, the cooling down is usually performed with ambient air, but colleagues wanted to speed it up with ice. Thus, also the containment basin was designed to be places on the guide rods of original device. The basin has inclined bottom, collecting channels and drainage hole to accommodate 8 mm plastic tubing for drainage redirection into the sink. The basin itself was printed in PETG, and for waterproofing it was covered with a few layers of Plastik 70 spray.

To detach the original front support adapter (support head) you'll need to remove the 8/32 threaded rod with 7/64 Torx screwdriver.

These model(s) were designed in Solidworks 2021 as part of work at Wageningen University and Research.

Tagi