Hinge Heavy Duty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part was made using fusion 360 and my goal was to produce a moving part that was printed in place without further…
- Ocena
- 4,5 / 5
- Polubienia
- 58
- Pobrania
- 547
- Wydruki
- 3
- Wyświetlenia
- 2196
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This part was made using fusion 360 and my goal was to produce a moving part that was printed in place without further work. I succeded and found that this hinge was stronger than expected. I used 100% infill and it took only 2 hours. You don't need this but if you want to use the part properly I suggest it. It took me many tries to make the perfect one. Here you go
I would scale it down by 50%
Print instructions
Category: Parts Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 75-100