Stadia Controller Holder multi color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stadia Controller Holder modified to be printed flat for manual color change
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 352
- Wydruki
- 17
- Wyświetlenia
- 1689
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Stadia Controller Holder oriented to make a filament swap mid print and highlight the Logo and Stadia's text.
How to make a filament swap?
I've modified a stl from https://www.thingiverse.com/thing:4040750 to print it on its face, flat, and avoid massive overhangs.
Top arm have been made a bit more larger because layer will not be in the correct orientation for maximum strength.
Can be printed in anything (PLA, PETG, ABS, ASA, PEEK, ROCK, etc…) there's no massive forces on it.
Mine is printed in ABS+ 0.2Layer Height with a manual filament change on the writings bridges. You will need to have a printer that will be correctly tuned for bridging.
(My settings: Bridge flow 75%, bridge width 70%, speed 70mm/s in a Voron 2.4)
To avoid little pieces of plastic on your parts due to oozing on filament change, add a shape on top of your print list that will serve as purge tower. It will be the first thing to be printed on each layer so the oozing will stick to it instead of your main part.
Have fun out there.