Vertical Mount for the 3DMakerpro Moose 3D Scanner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your scanner in the Vertical position on the Tripod for Moose Seires
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 209
- Wydruki
- 3
- Wyświetlenia
- 1164
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D printed mount is for the 3DMakerpro Moose 3D Scanner. Please share your experince, I would love to learn how I can improve my design!
*For this print you will additionally need:
- 1x 1/4-20 1/4" Threaded Heat Set Inserts for 3D Printing
- 8mm Height
- 1x O-Ring
- 10mm Outer Diameter
- 4mm Inner Diameter
- 3mm Height
- 3x Rummber feet
- 10mm Diameter
- 2mm Height
With this part, it will allow you to mount the scanner in the Vertical position on your 3DMakerpro Tripod for Moose Seires. This mount is meant to help you scan those more difficult models on the Basic Turntable.
While you can rotate to orientate the Moose scanner vertially with the tripod. This method creates 2 problems, first it becomes unstable because it offsets the center of gravity. Second, it creates a huge strain on the ball joint, so your scanner wont hold it's angle for long.
This mount is attached to the bottom of the scanner using the D-Ring Hinged Camera Fixing Screw that came with your scanner. The O-Ring helps centers the scew, allowing the mount to properly secure to the scanner.
Features:
- The arms wrap around the scanner to keep it in secure.
- The rubber feet will keep the scanner from sliding.
- The The unique shape of the base keeps the scanner from tipping over.
*If you don't have all the additional items to complete this build, or want to buy them, please visit my etsy store: https://www.etsy.com/shop/PixelFax