1 / 5
Mechanical 7 segment display with tighter CAM tolerences
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mechanical 7 segment display with tighter CAM tolerences
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model was not tight enouth for me when using a precise printer.
Made those changes:
- Made the SEG_PLATEpin for CAM 1mm taller. This make the cam jumping out of place les likely.
- Made the SYNC_GEAR hole smaller to have less play between the SYNC_GEAR and the SEG_PlATE. You can adjust it via the variable “syncGear_hole_thickness” in the fusion 360 model. Default diameter is at 8,1mm.
- Made the CAM_D1 and CAM_D2 hole smaller to have less play between the CAMs and the SEG_PlATE. You can adjust it via the variable “cam_hole_thickness” in the fusion 360 model. Default diameter is at 6mm.
- Made the CAM_D1 and CAM_D2 square bigger to have less play between the D cams and the A, B and C CAMs. You can adjust it via the variable “cam_square_thickness” in the fusion 360 model. Default diameter is at 0,15mm thicker than the original.