Hairdryer holder (no screws required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for a hairdryer that can be adhered to the wall.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
Very simple hairdryer holder, because I didn't like any of the other designs I could find. Holds it by the handle, rather than the ends, and so should work for a wide variety of hairdryers - while still having an opening to get the cable out. Inner diameter is 50mm, opening is 30mm wide.
I've printed this in PLA+ and it seems to be fine. I expect that regular PLA will be fine too. No supports or brim needed, at least in my case.
There are no screw holes; you can either drill/add those, or attach it on the wall with adhesive like I did - Command strips and equivalent humidity-proof wall adhesives should work fine. The backplate is extra large to accommodate weaker adhesives, that you need to use larger amounts of.