Elegoo Mercury X Wash Basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I ordered a 2nd wash basket, but it didn't come with the metal basket for removing parts easily. FDM prints 2 the rescue
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 901
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Elegoo doesn't include the metal basket on additional wash stations, only full bundles. So I modeled this after looking at wham bams model and going for it myself.
YOU MUST PRINT WITH NO TOP OR BOTTOM LAYERS WHILE USING HONEYCOMB FILL.
If you don't do this, it'll just be a flat plane and won't work.
You'll need to print
1x of the alcohol tray bottom (no top/bottom layers, honeycomb fill)
1x or 2x of the Handle. I found one is enough, you don't have to print this hollow.
2x of wall end (no top/bottom layers, honeycomb fill)
2x of wall side (no top/bottom layers, honeycomb fill)
2x of standoff, I printed solid, I suggest that as well.
I just used super glue to put it all together.