Seed Box Organiser Insert and Dividers

Introduction

As with most of my models they are things that I need or would like to have and those already published by other excellent designers don’t make for easy editing.  Also, they give me an opportunity to further my skill base in Fusion 360. These models are a perfect example of that 

In this case, I have two different sized tin boxes for my seeds, one for flowers and one for veggies.  Both are different sizes, and I wanted a way to be able to print out some inserts to go in them as well as dividers.  Initially designed slots for the dividers to slot into but I realised that that was unnecessary. So, the final product is what I present here today.

Model Description

The models here are fully parametric, adjust the box size and the dividers should automatically adjust.  I have tested them for my own dimensional requirements, and they appear to work. 

So, whatever the size of your storage container this model should be edited to fit. That is with the heavy caveat within Fusion360.

I have uploaded models for the two sizes I require and are here for illustration purposes. If you need further sizes uploaded, then please ask and I will endeavour to get them uploaded or DM’d to you directly.

• The Box: The walls of the box are 4mm thick with the other dimensions of the interior of my tins. The bottom of the boxes has a fillet to reduce elephants' foot and the need for support.

• Dividers: The dividers as previously mentioned should adjust automatically when you adjust your containers internal dimension.  These to have fillets for the same reasons as the box.

• There is a Tab at the top which you should be able to write whatever you would like to. 

I have seen other designs where the text is embossed onto the tab but in my experience of gardening my seeds will change with the seasons and in t e case of my Veg see they will be organised into those I sow successionally and those which will be sown once or twice a season. The flower seeds ill be organised by the month that they will be sown.

Available Files

To cater to various needs and preferences, I have provided the following file types:

• Fusion 360 (.F3D)
• 3MF
• STEP
• .STL

Feel free to customise and modify the design to suit your specific requirements.

Community Collaboration

I encourage you to share your customised versions on the community sharing page. By collaborating, we can learn from each other and enhance the design further. If you encounter any issues or if the design does not meet your expectations, please let me know on the sharing page. I will do my best to address any concerns.

Please like, save, and share the design if you find it useful. Your feedback, both positive and constructive, is invaluable in helping me improve these creations. I’d also love to see photos of your prints! I’m curious to see how they turn out for you.

Print Settings:

• Dynamic Quality
• Nozzle: 0.2mm
• Walls: 3
• Top/Bottom Layers: 4
• Infill: 15% Cubic
• Supports: No
• Material: eSun PLA
• Colour: Grey
• Weight: 78.2 g
• Print Time: 20 hours 35 minutes.

Instructions for Use

1. Download Files: Access the provided files in your preferred format.
2. Print: Use the recommended print settings for the best results.
3. Divider: This needs to be rotated 90 degrees onto its front to take advantage of the fillet as I neglected to fillet the back face. Silly me.
4. Share: Upload your customized versions and photos of your prints on the community sharing page.

Conclusion

Thank you for your interest and feedback! By sharing your experiences and improvements, we can collectively refine and perfect this design. Let’s continue to innovate and create together.

Links for 3D Models:

• Link URL