WeatherFlow Tempest Mounting Brackets (For 1" SCH80 PVC Pipe)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
How I mounted a WeatherFlow Tempest weather station to my backyard fence gate post.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
How I mounted a WeatherFlow Tempest weather station to my backyard fence gate post.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
No
Supports:
No
.2 mm
Infill:
35%
Brackets are attached to a wood beam inside the gate post.
I drilled pilot holes into the post and used #10 x 3" (inch) Deck screws to mount the brackets to the gate post.
I used 1/4-20 x 2 inch screws with combo nuts to secure the pipe to the mounting bracket using the 6 mm holes in the side of the bottom bracket.
About the design process...
I run Ubuntu Linux on all my home computers. This limits my choices for CAD software so I have taught myself how to use FreeCAD since there is a native Linux version that seems to be getting more stable as time goes by.
Category: DIY