HSW modular 35mm / 2oz acrylic paint holder

Honeycomb Storage Wall / HSW

I added holders for the 2 oz bottles, Decoart/Folkart/Createx/mica powders.
You could cut the heights down if you have a smaller bottle.

The key holes are spaced centered on each one so they can be adjusted or moved.

I also increased the thickness by 1 mm on the va bracket so they wont break off as easy and added negative text for identifying (in the .3mf file).

When I designed the holders, I was using the 1 mm height bracket, printed, then increased the thickness of the va bracket as an after thought.  
In the holder it will stick up a litte but but I'm not too concerned and would rather not spend the time to fix it.

These holders can also be moved around without taking the others out.  

Big props to Warlogh for designing the bracket that will allow different configurations and angles, now if something changes you won't have to reprint the entire holder, just the bracket.  I've been putting this off for 8 months and his designed sparked ideas for the final design.

NOTE the honeycomb walls and holders were printed on my Prusa XL with the 0.6 nozzle, 0.32 layer height in PETG and all the connectors/holders/brackets were on my mk2.5s, 0.4 nozzle, 0.2 layer height.

The distance in between two rows.. go up two 'holes' then over one.