1 / 13
BTT HDMI5 V1.2 display mount Voron
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTT HDMI5 display mount for Voron Trident and 2.4 (2020 extr). For HDMI5 V1.2 - Compatible with Clicky-Clack
- Ocena
- 4,966 / 5
- Polubienia
- 227
- Pobrania
- 12 070
- Wydruki
- 28
- Wyświetlenia
- 22 369
- Oceny
- 29
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 28) (Komentarze: 57)Remiksy (13)Kolekcje (346)Powiązane
**This design is for HDMI5 V1.2**
If you're looking for HDMI5 V1.1 mount, use this one: https://www.printables.com/model/787236-btt-hdmi5-v11-display-mount-voron
Notes
- Mount BTT HDMI5 Version 1.2 on Voron V2.4 and Trident
- My display came with 90deg HDMI and USB-C cables
- If yours come with straight HDMI and USB cables, you'll need to use 90 deg adaptors
- Choice of regular frame or Voron logo frame
- Alternative bracket to be compliant with Clicky-Clack door (offset by 20mm)
Printing notes
- All STL are oriented correctly
- No support required
- Print as per Voron specified parameters (0.2 layer, 0.4 width, 40% infill)
- When printing the bracket, I suggest you paint seams to prevent them from starting in high overhang areas. Also ensure you set your minimum layer time to greater than 30s to slow down and give time to cool down the filament. If you don't you, might see signs of overheat in the thinner portions of the bracket
- Break the bridge helpers on the mount frame before assembly
BOM
- 6x M3x8 SHCS
- 2 M3 T-nuts (to mount to 2020 extrusion)
- Printed parts
Update [2024-07-17]
- Addition of an alternative bracket that moves the displays out by 20mm to be compliant with the Clicky-Clack mod (thanks to @Phil_226665 for suggesting and testing the bracket)
- Addition of a Voron Logo frame