1 / 2
Gator Clamp better better mechanics
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headphone/bag holder for your desk, in the shape of a gator!
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 373
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (1)Kolekcje (25)Powiązane
Remix of a remix of the Gator Clamp. Clamp it onto your desk and hang headphones or bags! Supports desks between 0-40 mm thick.
Assembly required -
- Arms and legs align with pegs into the body. A drop of CA glue may be helpful here
- Jaw is slid into the body with a dovetail
- “Nut” is inserted from the top into the legs. A drop of CA glue may be helpful, but the clamping force will keep the nut in place as well
- “Screw” is threaded into the “ScrewCap”. A drop of CA glue may be helpful here
- “Screw” is threaded from below into the “Nut”
Thin rubber or other grippy material may be useful within the jaw to clamp to the desk better.
The “nut” and “screw” are M12-1.75, in case that's helpful for fine tuning the fit.
See image for recommended print orientation. Supports only needed for the “body”, mainly for the dovetail portion.