1 / 5
Roll-keeping phone table for toilet walls
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You use your smartphone in your toilet? But no place to lay it down? 3Dprint this table!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- GNU General Public License v3.0
[Caution]
Screw this table tightly enough on the wall of your toilet, but do not put your weight on it.
Use screws and anchors for gypsum boards, if needed.
[Files]
Fillet width of the top table of RightOpenSquare.stl is 0.9 mm.
That for LeftOpen.stl and RightOpen.stl is 5.0 mm.
roll.FCStd is FreeCAD source.
[Method]
Filament: PLA
Filament required: over 200 g
Support material: No
Infill: 10-20%
Build Plate Adhesion: Skirt
ETA: over 20 hours