Gridfinity threaded pin / plug tap bin - V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity 1x2x3 bin for storing ø3, ø4, ø5, ø6 & ø8 mm threaded pins / plug taps / screw taps - Version 2
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 296
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A stackable Gridfinity 1x2x3 bin with a raiseable cassette containing 5 threaded pins / plug tabs / screw taps with the following diameters: 3, 4, 5, 6 & 8 mm.
The cassette can easily be raised for easy access or lowered for compact storage.
There are cassettes for storing the taps with the cutting edge out or in (i.e. protected) depending on your preference.
Print settings
- Nozzle 0.4mm
- Layer height 0.2mm
- 3 Perimeters
For the cassettes
- Organic supports - from build plate only
Assembly
After installing the cassette in place, install the lock pins to keep the cassette in place.


Attribution
The base box is generated with the Fusion 360 GridfinityGenerator, https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789.