Milwaukee M18 Battery Cover - Vase Mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vase mode printable terminal cover for Milwaukee M18 batteries. Print with 0.4mm or larger nozzle with line width 0.9mm.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 433
- Wydruki
- 0
- Wyświetlenia
- 1505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a vase mode printed cover for the Milwaukee M18 battery terminals. It has an internal spine that gives it strength and rigidity.
The print uses the battery latches to lock in place. For longevity of the part, I recommend squeezing the unlock buttons on the battery when applying or removing the cover.
Printing
The design is meant to be printed with a 0.4mm or larger nozzle at 0.2mm layer height in vase mode. Print standing up as oriented in the stl file.
Set all line widths to 0.9mm in your slicer - images for Bambu Studio and Prusa Slicer are attached.