Flag Officer Badges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable decorative flag officer rank badge art piece.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Print this kit to make any flag officer rank. Order of operations:
- Print all parts flat (print inserts upside down, use textured build plate for best effect)
- Paint all parts, paint deltas on the base black if applicable to indicate rank, clearcoat
- Snap inserts into base (a small diameter brass rod or wood bbq skewer to help along any odd corners
- Glue star onto delta
- Glue delta onto deltabase, then onto base. Let cure (5 min epoxy)
- Glue 20mm x2mm round magnet into back of base, opposite magnet into backing plate.
If display stand is desired, print <display> parts out and assemble, gluing base into display top and inserting stand into display top.
This post contains material that may be copyrighted by another rights holder, however as this artwork is transformative in nature and intended to be shared for educational purposes, this constitutes a “fair use” under section 107 of the US Copyright Law (Title 17 of the United States Code). If you have concerns over the material being shared, please contact me via DM to discuss.