1 / 6
Window Air Conditioner Bottom Support 50mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bottom frame support for window air conditioners that reduces vibration and noise.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This support, when combined with a piece of medium-density foam, reduces vibration and noise to a very large degree. I live in NYC and trying to sleep with a noisy air conditioner in your bedroom sucks. This model comes as a flat block, or with a cut-out wedge that conforms to moulding on the window sill.
Instructions:
- Measure the distance between the bottom of your air conditioner frame (the metal part behind the plastic fascia).
- Adjust the height of the Main body or Extension body to fill the distance above.
- Print the bodies as one piece, and print 2-3 pieces depending on how wide your air conditioner is.
- Stick a piece of adhesive-backed medium-density foam to the top of the supports.
- Place the supports between the bottom of the air conditioner and the window sill.
- Turn the air conditioner on, then place one finger on the bottom on the air conditioner and another on a support. You'll feel far less vibration on the support compared to the frame.