1 / 1
Paw keychain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print pet print keychain.
- Ocena
- 5 / 5
- Polubienia
- 117
- Pobrania
- 597
- Wydruki
- 5
- Wyświetlenia
- 1415
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 5) (Komentarze: 7)Remiksy (0)Kolekcje (173)Powiązane
This is a paw keychain that I found on Thingiverse by creator RESTYL3D. I learned how to insert a pause in the Gcode on my CURA slicing software on layer 28.
- File, Open Files and select Paw keychain.stl
- Extensions, Post processing, and Modify G-code
- Select Add Script, Filament Change
- Tick Use Firmware Configuration and change Layer to 28 and Close
- Slice with 20% infill, no support and Brim for adhesion
- Save your print and at layer 28 it will pause. Change filament color and continue.
I have added my Elegoo Cura g-code.
