3mm Bungee Cord Hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple model that used 3mm shock cord to make a bungee cord
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 1575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
This is a simple bungee cord hook that allows you to turn some 3-4mm shock cord into a custom bungee cord.
I use bungee cord to hold my hiking back into the back of my car. my old bungee cord broke but I had some old 3mm shock cord laying around so I made this.
Print with either PETG, ABS, or nylon if its going to be in a hot place like a vehicle.
To assemble tie a knot at one and and feed it though the 2 hooks in an “S” shape. This will allow the cords to equalize in length.
I've included both a SolidWorks file and a Step file for modification if desired.