Hollywood Vanity Cover bracket with magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to hold up a piece of plexiglass in front of the Hollywood vanity lights.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Hollywood vanity cover.
My wife wanted to do something with the Hollywood vanity lights in our guest bathroom. We came up with the idea of plexiglass with some window film applied to it. I designed the brackets to hold the plexi up and out from the bulbs.
The design has a lip on the top and bottom inside front that holds the plexi in place. The back is recessed so magnets can be glued in place. The magnets are listed as 60 x 10 x 3mm. The design with the single magnet wasn't strong enough. Revision time. The magnets are double stacked (side by side) to hold better. The magnets do not set all the way into the frame so they can clear the lip on the top and bottom of the vanity.
The plexi was advertised as 1/8" x 6" x 36" but it was not those when it arrived. Revision time part two.