Airsoft ASG Scorpion Evo Vertical AEG Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical Pistol Grip for the ASG Scorpion Evo
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 154
- Wydruki
- 2
- Wyświetlenia
- 1225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This Grip is designed for the AEG version of the ASG Scorpion Evo. For HPA grips, check my other Evo projects.
Make sure you know what you are doing, as you will have to realign the motor with the gearbox and the cable fitment is pretty tight.
MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018
You'll need 4 self tapping screws. M2.6 screws with a head diameter of 4.32mm and a thread length of 12mm.
You will also need the original big motor height adjustment screw from the bottom plate of the original grip.
I recommend melting the self tapping screws into the grip before assembly to create a perfect thread.