Toniebox Battery MicroSD Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement part for the inner Toniebox battery part with MicroSD extension mount.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 357
- Wydruki
- 2
- Wyświetlenia
- 2085
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This replaces the inner mount for toniebox battery with one that can additionally mount a MicroSD extension slot. - No glue required!
This is highly helpful if you are working with teddybench or teddycloud:
https://tonies-wiki.revvox.de/docs/wiki/cc3200/microsd-compatibility/#sd-card-extension
It still is kept compatible if you do not mount a microSD extension cable.
A compatible bottom cover can be found here:
https://www.printables.com/model/927962
ATTENTION: Remove the SDCard previously to adding/removing the bottom cover - it slightly stands out into the bottom cover for easier removal.
I added a “STOCK-Bottom-Plate.stl” version where the endstop for SDCard-Reader is 3mm more into the back. With this it is possible to continue using the stock bottom cover while the SDCard is inserted. Obviously you will then have to remove the cover every time you need to remove the SDCard. :)
The object is already aligned in print direction.
Due to the objects architecture it is necessary to be printed with supports from build plate enabled.